Start here
What's your outage pattern?
Four patterns, four different correct answers. Find yours and the rest of the specification follows from it.
A battery backup unit covering a fridge, some lighting, and phone charging handles this silently, with no fuel and no maintenance. Cheaper to live with, and it doesn't need starting.
The value option. You start it and throw a switch, and your hardwired circuits work — furnace, well pump, lighting, garage door. Far cheaper than standby, and it removes the extension cords and the backfeed risk entirely.
Manual starting and refuelling wears thin fast when it happens repeatedly or lasts days, and portable fuel supply becomes a genuine logistics problem during a regional event.
The only option that works when nobody's home to start anything — which is what protects a freezer, a sump pump in a rainstorm, or heating in a cold snap while you're travelling.
Tell us which of those describes you and the sizing conversation starts from the right place rather than from a product range.
Sizing starts here
What actually has to stay on
Not with the generator catalogue.
Refrigerator and freezer, heating system controls and blower (a gas furnace needs very little power to run, but it needs it), sump pump if you have one, well pump if you're not on municipal water, a handful of lighting circuits, and outlets for phones and devices.
Internet and networking equipment, garage door opener, medical equipment, a circuit for a home office, and security systems.
Central air conditioning, electric range and oven, electric water heating, clothes dryer, EV charging. These are the big consumers, and including them is what drives generator size — and cost — upward sharply.
Worth knowing: many standby systems can include load management, which sheds or staggers large loads automatically. That lets a smaller generator serve a whole panel by never running the range and the air conditioning simultaneously — frequently allowing a meaningfully smaller unit for the same practical experience.
Motor starting matters too. Well pumps, sump pumps, air conditioners, and refrigeration compressors draw far more current for a moment at start-up than they do running. A generator sized only on running loads will stall on the first pump start. This is where undersized systems fail, and it's why sizing is a calculation rather than a rule of thumb.
Before you buy
What a generator won't do
- It won't power everything, unless you pay for that. Whole-house capability means a much larger unit and, on propane, a much larger tank.
- It won't be instant. Automatic standby systems take several seconds to detect an outage, start, and transfer. Computers, servers, and anything that can't tolerate a brief interruption still need a UPS between the outlet and the equipment.
- It won't run forever. On natural gas, as long as supply holds. On propane or petrol, until the fuel runs out — and during a regional outage everyone else is queuing for fuel too.
- It won't look after itself. Standby units need their exercise cycle and annual servicing. A generator that hasn't been maintained is a generator that doesn't start, which is worse than not having one.
- It won't be silent. Quieter than a portable, but audible — including during weekly or monthly self-tests.
Why Soulsbyville calls us
What you get when you call Frontier Electric
We start with your outages, not the product range
Because a two-hour outage and a three-day outage call for entirely different equipment.
We'll point you at the cheaper option where it fits
An inlet and interlock with a portable solves a great many situations for a fraction of standby cost. If that's you, you'll hear it.
We size on starting loads, not just running loads
Which is where undersized systems fail on the first cold morning.
Permitted, inspected, documented
Generator work involves electrical permits, usually gas permits, and sometimes zoning approval. We handle it and hand over the paperwork.
Commissioned under load
Tested properly, transfer verified, and you're shown how to operate and maintain it.
What we do
Our generator services in Soulsbyville, CA
Automatic standby installation
Pad, electrical, fuel connection, automatic transfer switch, and full commissioning.
Manual transfer switch installation
A permanent, compliant way to feed selected circuits from a portable generator.
Generator inlet and interlock installation
Exterior inlet plus a listed panel interlock — usually the most cost-effective compliant connection for a portable.
Load assessment and sizing
Running loads, starting loads, and what you actually want available.
Backup subpanel installation
Grouping essential circuits so they're easy to feed.
Fuel connection coordination
Natural gas and propane, coordinated with the appropriate trade and utility.
Battery backup systems
Silent, fuel-free backup for shorter outages and essential loads.
Generator replacement and upgrades
Replacing aging units, or converting a manual setup to automatic.
Commercial and life-safety systems
Emergency power for buildings with code-required backup obligations.
Servicing and fault diagnosis
Exercise checks, annual service, and units that won't start.
The critical equipment
Connecting it safely: interlock, manual, or automatic
A generator must never be able to feed your house and the utility grid simultaneously. That separation is the entire purpose of this equipment.
Backfeeding provides none of this A cord from a generator into a wall socket energises your household wiring and, through your service, the lines outside. It's how utility crews get killed during restoration, it's illegal in most jurisdictions, and it isn't something we'll install around.
Fuel
What each fuel means day to day
Natural gas
No refuelling, no storage, no run-time limit while supply holds. Requires an adequately sized gas line — a generator is a large appliance and existing piping is frequently undersized for it, which is one of the more common add-on costs. Units typically produce slightly less output on natural gas than on propane.
Propane
Stores well and works without gas service. Tank size sets your run time, so size it for the outage you're actually preparing for — during a regional event, refills are competitive.
Diesel
Common in larger and commercial installations. Storage, periodic fuel turnover, and cold-weather handling all need managing.
Petrol
Portables only. Convenient, but stores poorly without stabiliser, requires you to be present, and means keeping fuel on the property safely.
Fuel choice usually follows what's already at the property. Where there's a genuine choice, it's a trade between refuelling hassle and installation cost.
Position
Placement, clearances, and noise
- Clearances are not negotiable. Standby units have manufacturer-specified minimum distances from the building, and code plus local rules add requirements around windows, doors, and air intakes — because exhaust must not find its way indoors.
- Property line setbacks apply in many municipalities, and some have noise ordinances affecting placement or permitted exercise times.
- Noise and the exercise cycle. Standby units run a scheduled self-test weekly or monthly. Placement relative to your own bedrooms and your neighbours' windows is worth deciding before the pad is poured, not after the first Sunday morning test.
- HOA and strata rules often govern placement, screening, and sometimes whether generators are permitted at all. Check before ordering equipment.
- The pad. A level base — concrete or manufactured composite — with service access around it.
The ideal electrical location and the ideal exhaust location aren't always the same spot, which is why this gets assessed on site.
Scope
What the installation involves
- Site assessment and sizing — loads, starting demands, fuel, placement, clearances.
- Permits — electrical, usually gas, and sometimes zoning or building approval.
- Pad preparation — level, correctly positioned, with service access.
- Electrical work — transfer switch or interlock, generator feeder, and any backup subpanel.
- Fuel connection — gas line sized to the unit's demand, or propane tank and regulator.
- Setting and connecting the unit.
- Commissioning — start-up, load testing, transfer sequence verified, exercise schedule configured.
- Inspection — coordinated with the authority having jurisdiction.
- Handover — documentation, warranty registration, and a walkthrough of operation, alerts, and maintenance.
Inlet and interlock installations for a portable are typically a day. Automatic standby installations take longer and depend on fuel and permit scheduling.
How it works
Our process
-
Consultation
Your outage pattern, what must stay on, whether you're often away, and what fuel is available.
-
Load assessment
Running and starting loads, producing a size rather than a guess.
-
Options and written quote
Every route that genuinely fits — battery, portable and interlock, manual transfer, automatic standby — with prices and trade-offs.
-
Permits and scheduling
Permits pulled, fuel and utility coordination arranged, work scheduled.
-
Installation
Pad, electrical, fuel, and transfer equipment.
-
Commissioning and training
Tested under load, transfer verified, and you're shown how to run and maintain it.
Maintenance
Keeping it ready
Backup equipment fails from disuse more than from use.
- Let it exercise. The scheduled self-test keeps the engine and battery healthy. Don't disable it because it's noisy — move the schedule instead.
- The battery is the number one failure point. Standby generators start on a battery, and a flat battery means no start regardless of how much fuel is in the tank.
- Service annually or per the manufacturer's interval — oil, filters, inspection.
- Keep the enclosure clear of vegetation, snow, and stored items. Airflow and exhaust both matter.
- For portables: run them periodically, use fuel stabiliser, and don't store fuel indefinitely.
- Test after any electrical work on the property, so problems surface on a Tuesday rather than during an outage.
Commercial
Commercial and life-safety generators
We install and service backup power for restaurants, retail, offices, warehouses, healthcare and care facilities, and multi-unit residential buildings across Soulsbyville.
Commercial requirements differ fundamentally. Many buildings carry code-mandated emergency power obligations covering egress lighting, exit signage, fire systems, and elevators — with testing and record-keeping attached. Separately, there's the commercial case: refrigeration, point-of-sale, servers, and production equipment that stop earning the moment power stops.
Commercial installations typically involve three-phase supply, larger transfer equipment, and load prioritisation across multiple panels. Obligations and operational priorities are rarely the same list, and we'll assess both.
Pricing
What affects the cost
- Automatic standby versus a manual setup — the largest factor by far.
- Generator size — driven by what must run and by starting loads.
- Transfer equipment — automatic switch, manual switch, or interlock kit.
- Fuel work — gas line sizing and length, or propane tank and regulator.
- Distance from generator to panel and to fuel source.
- Pad and site preparation, including access and landscaping.
- Backup subpanel where essential circuits are being grouped.
- Permits and inspection — electrical, gas, and sometimes zoning.
- Load management equipment where it allows a smaller unit.
One written quote covering the complete installation.
Service area
Areas we serve near Soulsbyville
Frontier Electric proudly serves Soulsbyville, CA and the surrounding neighborhoods, installing and servicing residential and commercial backup power throughout the area. Unsure whether you're in range? Call and ask.
Questions
Frequently asked questions
Can I plug my generator into a wall outlet?
No. Backfeeding energises utility lines and can kill crews restoring power, and it's illegal in most jurisdictions. An inlet with an interlock or a transfer switch is the correct connection and isn't expensive.
Can I run a portable in the garage with the door open?
No. Portable generators produce carbon monoxide in dangerous quantities and enclosed or partly enclosed spaces accumulate it. Outdoors only, well away from the building, exhaust pointed away — and keep working CO alarms inside.
Do I need a whole-house generator?
Often not. Heating, refrigeration, pumps, and some lighting and outlets cover most of what makes an outage difficult, and allow a much smaller unit. Load management can also let a smaller generator serve a full panel.
How much does generator installation cost in Soulsbyville?
Mostly whether you want automatic standby or a manual setup with a portable, then size and fuel work. You'll get one written quote covering electrical, fuel, permits, and commissioning.
What's an interlock kit?
A mechanical device on your panel that makes it physically impossible for the main and generator breakers to be on together. Where a listed kit exists for your panel, it's usually the cheapest compliant way to connect a portable.
Will a generator power my air conditioning?
Only if it's sized for it, including the starting surge. Air conditioning is one of the loads that pushes generator size and cost up sharply.
Natural gas or propane?
Natural gas means no refuelling and no run-time limit but needs an adequately sized gas line. Propane works without gas service, with run time limited by tank size. Choice usually follows what's already at the property.
Does it start automatically if I'm away?
Automatic standby units do — that's their main advantage. Manual setups need someone present.
How long will it run?
On natural gas, as long as supply holds. On propane, until the tank empties — which is why tank sizing should match the outage length you're preparing for.
Do I need a permit?
Yes — electrical, usually gas, and sometimes zoning or building approval. We handle permitting and inspection.
Will my computer stay on during the transfer?
No. Automatic transfer takes several seconds. Anything that can't tolerate a brief interruption needs a UPS as well.
What maintenance does it need?
Let the exercise cycle run, keep the battery healthy, service annually, and keep the enclosure clear. A flat battery is the most common reason a standby unit fails to start.
Is battery backup a real alternative?
For shorter outages and essential loads, yes — silent, no fuel, no CO, minimal maintenance. Duration is the trade-off unless it's paired with solar.
Match the system to the outage
An hour twice a year and three days after every storm are different problems, and they have different correct answers. So does being away when it happens.
Frontier Electric starts from your outage pattern, sizes on real loads including starting surges, and lays out every route — including the cheaper ones.